檔案:Flag of Belarus (construction sheet).svg

頁面內容不支援其他語言。
Chhiùng Wikipedia lòi

Ngièn-pún tóng-on(SVG文件,尺寸:1,282×686像素,文件大細:10 KB)

邇文件來自於Wikimedia Commons,其可能在其它計劃項目肚分應用。 其在[1]介片上嘅描述在下背展示。

Vùn-khien sot-mìn

Mèu-sut
English: Flag of Belarus — construction sheet
Ngit-khì
Lòi-ngièn

Chhṳ-kâ ke chok-phín. Basic geometry and dimensions from the description in Belarus Law No. 301-Z.

The national flag of the Republic of Belarus is a rectangular panel consisting of two horizontal colored stripes: the upper one is red and the lower one is green. The ratio of the width of the red and green stripes is 2:1. The ratio of the width of the State Flag of the Republic of Belarus to its length is 1:2. At the pole there is a Belarusian national ornament of red color on a white field, which is 1/9 of the length of the State Flag of the Republic of Belarus. The national flag of the Republic of Belarus is mounted on a staff (flagpole), which is painted in golden (ocher) color. The ratio of the width of the State Flag of the Republic of Belarus to the length of the staff is 1:3.

— English translation of Chapter 2, Article 4 Law 301-Z

The version of Law No. 301-Z linked above contains a small blurry image of the flag with no labeled dimensions. The image clearly shows a vertical red stripe along the hoist that is not mentioned in the text.

In addition to Law 301-Z, the Belarus State Committee on Standardization maintains standards for the flag in СТБ 911-2008. СТБ 911-2008 was updated in 2009 with text that can be seen at ru.wikisource.org.

The length of the flag is limited from the pocket of the flagpole by a vertical red stripe with a width equal to 121 of the ornament horizontally.

— translation of 2009 amendment to СТБ 911-2008

That text can be interpreted as a vertical red stripe between the hoist and the ornament; it is contained within the borders of the flag and is not part of the hem or pocket. Oddly enough, the specification drawing included with the text in the 2009 update for СТБ 911-2008 did not include the red stripe. Oops.

In 2012, the government amended СТБ 911-2008 again and added a new specification drawing that did include the red stripe: [1]. The specification drawing includes dimensions for the red stripe and the ornament. Sadly the specification drawing is low quality and presented to us only in JPG format which makes it impossible to recreate the internal geometry of the ornament with any degree of precision.

The government does provide an larger JPG image at mfa.gov.by/sgp/state_symbols. It is higher resolution than the image in СТБ 911-2008, but it is still a JPG and it is impossible to perfectly extract precise internal geometry for the ornament. Also, the width of the ornament in the JPG is about 4% wider than the the law dictates.... and the red vertical stripe is about 3% wider than the dictated by СТБ 911-2008. Oops again.


The red vertical stripe on this construction sheet is set at exactly 121 the width of the ornament as per СТБ 911-2008.

The ornament on this construction sheet is based on best effort measurements from the JPG image listed above. It has been squeezed to make its width 19 the length of the flag, and its internal coordinates have been snapped to 200×900 grid. Note that due the the low quality of the source JPG image, there is no justification to use a higher resolution than 200×900. Reflectional symmetry (horizontal and vertical) has been applied. For scale purposes, a 100x450 grid has been drawn on top of the ornament, but this is not to imply that the designer of the ornament used any grid at all. Attempting to determine the grid size (if any) that was used for the original design of the ornament is an exercise in complete and utter frustration.


The ornament can potentially improved by redrawing it on a grid with a small number of large rectangles as seen in File:Belarus_flag_pattern.svg, File:Flag_of_Belarus_(ornaments).svg, and, vexillographia.ru. In one the examples shown at vexillographia.ru, all the lines in the ornament are the same width as the vertical red stripe; it gives the flag a sharp and clean look. But alas, any such modifications are in violation of Chapter 1, Article 3 of the Flag Law 301-Z.

The State Flag of the Republic of Belarus and its image, regardless of their size, must exactly correspond to the standard of the State Flag of the Republic of Belarus.

— Chapter 1, Article 3 Law 301-Z
Chok-chá MapGrid
Khièn-han:
(Chhùng-yung liá-chak tóng-on)
2022 Russian Invasion Zed symbol 法律聲明
這張圖像呈現(或用來代表)俄羅斯聯邦及其武裝部隊及其相關組織或其他宣揚、美化侵略戰爭和侵略行為

使用有關標識可能違反捷克共和國、德國、哈薩克斯坦、吉爾吉斯斯坦、拉脫維亞、立陶宛、摩爾多瓦、烏克蘭及其他國家的法律。

Su-khièn

Insignia 這幅圖片所顯示的是旗幟盾徽印章或其他正式的徽章。在某些國家或地區使用此符號可能會受到限制,但是這些限制與版權問題無關。
此檔案不具有著作權,屬於公有領域,因為其所包含之内容均為公共財產且沒有明確的原始作者資訊。

說明

添加單行說明來描述出檔案所代表的內容
Flag of Belarus — construction sheet

在此檔案描寫的項目

描繪內容 繁體中文

Vùn-khien li̍t-sṳ́

Tiám-khim ngit-khì / sṳ̀-kiên lòi chhà-khon tông-sṳ̀ chhut-hien-ko ke vùn-khien.

Ngit khì / Sṳ̀-kiênSuk-lio̍k-thùVì-thuYung-fuYi-kien
tông-chhièn2023年1月11日 (Sâm) 13:552023年1月11日 (Sâm) 13:55 ke pán-pún ke Suk-lio̍k-thù1,282 × 686(10 KB)MapGridReduced all dimensions by a factor of 21 because I think it may be easier for the brain to interpret smaller numbers. It comes down to a tradeoff between fractions or large integers. There is no change to the flag geometry.
2023年1月6日 (Ńg) 23:172023年1月6日 (Ńg) 23:17 ke pán-pún ke Suk-lio̍k-thù1,282 × 686(10 KB)MapGridUploaded own work with UploadWizard

Mò ya̍p-mien lièn-chiap to pún vùn-khien.

Chhiòn-vet tóng-on sṳ́-yung chhong-khóng

Hâ-lie̍t khì-thâ Wiki chûng sṳ́-yung liá-chak tóng on:

Ngièn sú-kí